求教 HDB窗户把手坏了怎么换？
havfrue • • 42598 次浏览在楼下杂货店看到有卖xin把手。但我琢磨不出怎么把现有的拆下来…
-
#1
两个圆角的方块下面应该有螺丝或空心铆钉。用刀或电笔翘开看下。
空心铆钉的话用电钻打孔的方法去掉。 -
#2
+1五金店有把手，前几天买了一个9块的样子
-
havfrue 楼主#3
谢谢！！用螺丝刀把小方片撬开了！
里面是螺丝 :D
感觉自己棒棒哒
谢谢万能的狮城帮网友
-
#4
想问一下，你图片里面左侧黄色小垫块哪里有卖的五金店找了一圈，只有右侧把手卖的，但是没有左边那个垫片买
-
#5
这么贵吗便宜的有一两块的
-
#6
我家的也坏了正准备买了
-
havfrue 楼主#7
我不知道哎搬进来就有了
不是HDB自带的就是前屋主买的… -
havfrue 楼主#8
我家楼下杂货店的三块还可以的样子
-
#9
对啊，一定找小店买home fix东西很贵
-
#10
【装修】求教 HDB窗户把手坏了怎么换？There are 2 types of handle latch , one screw on each side and 2 screws on each side , you take out the existing
one ( remove rectangle cover) and bring to hardware shop to get the same hole position type ( you no need to drill
hole again ) , the left hand side plate not easy to buy , after fixed the RHS latch , try to close , if the old LHS plastic plate
block the closing , you either 1. remove the LHS plate or 2. remove or file /cut the plastic tip on new RHS latch.
1 screw on each side of the latch type is cheaper as some one saying $3 each and the 2 screws on each side type its more
expensive , if your quantity is only one , it is not worth to search for whole seller to buy at $2-3 each , just get from your
neighborhood hard wear shop will do. Happy DIY